Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorTrzcionka, Agata-
dc.contributor.authorNarbutaitė, Rūta-
dc.contributor.authorPranckevičienė, Alma-
dc.contributor.authorMaskeliūnas, Rytis-
dc.contributor.authorDamaševičius, Robertas-
dc.contributor.authorNarvydas, Gintautas-
dc.contributor.authorPołap, Dawid-
dc.contributor.authorMocny-Pachońska, Katarzyna-
dc.contributor.authorWozniak, Marcin-
dc.contributor.authorTanasiewicz, Marta-
dc.description.abstractThere are several methods of reducing a microleakage, and one of them is choosing appropriate adhesive material. The aim of the work was the in vitro analysis of 4 bonds: 3M ESPE “Single bond”, Dentsply “Prime and Bond Active”, Coltene “One Coat 7 Universal”, and Kuraray “Clearfil Universal Bond Quick”. Material and methods: 136 healthy molar teeth were collected and randomly split into 4 groups and Vth Class cavities were prepared. Chosen adhesives were used in four groups of teeth with the same composite. Teeth were the thermocycled, sealed, covered with lacquer, and submerged in 1% methylene blue solution for 24 h. After the thermocycling, the vertices of each tooth were sealed using dental wax. Each tooth was then fully covered with lacquer. All teeth were then submerged into 1% methylene blue solution for 24 h in room temperature. In the next step they were transversely cut through a center of restoration. The Olympus BX43 microscope was used to photograph each cut tooth. With the usage of Olympus stream software, measurement of the dye’s leakage was performed. Results. The statistical analysis proved that the most effective material when applied to ideally prepared cavity surface was Dentsply “Prime and Bond Active”. The second material was 3M ESPE “Single Bond”, third—Coltene “One Coat 7 Universal” and fourth—Kuraray “Clearfil Universal Bond Quick”. The most effective material applied to a too-dry surface was Dentsply “Prime and Bond Active”, second—3M ESPE “Single Bond”, third—Coltene “One Coat 7 Universal” and fourth—Kuraray “Clearfil Universal Bond Quick”. When it comes to too damp surfaces the best results were obtained with Dentsply “Prime and Bond Active” then Coltene “One Coat 7 Universal”, 3M ESPE “Single Bond” and Kuraray “Clearfil Universal Bond Quick”en
dc.description.sponsorshipInformatikos fakultetas-
dc.description.sponsorshipKauno technologijos universitetas-
dc.description.sponsorshipLietuvos Sveikatos mokslų universitetas-
dc.description.sponsorshipLietuvos sveikatos mokslų universitetas-
dc.description.sponsorshipTaikomosios informatikos katedra-
dc.description.sponsorshipVytauto Didžiojo universitetas-
dc.format.extentp. 1-10-
dc.relation.ispartofCoatings. Basel: MDPI AG, 2020, vol. 10, iss. 9-
dc.relation.isreferencedbyScience Citation Index Expanded (Web of Science)-
dc.relation.isreferencedbyCurrent Contents Engineering (Computing & Technology)-
dc.subjectAdhesive dentistryen
dc.subjectDental materialsen
dc.subjectRestorative dentistryen
dc.subject.otherInformatika / Informatics (N009)-
dc.titleIn vitro analysis of quality of dental adhesive bond systems applied in various conditionsen
dc.typeStraipsnis Clarivate Analytics Web of Science ar/ir Scopus / Article in Clarivate Analytics Web of Science or / and Scopus (S1)-
local.object{"source": {"code": "vdu", "handle": "64466"}, "publisher": {"name": "MDPI AG", "list": false}, "db": {"clarivate": true, "scopus": false, "list": true}, "issn": ["2079-6412"], "doi": "10.3390/coatings10090891", "code": "S1", "subject": ["N009"], "url": [""], "country": "CH", "language": "en", "area": "N", "original": true, "pages": 10, "sheets": 0.714, "timestamp": "20201105103949.0", "account": {"year": 2020, "late": false}, "na": 10, "nip": 2, "affiliation": [{"contribution": 0.1, "aip": 1, "country": ["PL"], "rel": "aut", "lname": "Trzcionka", "fname": "Agata", "status": "0", "name": "Trzcionka, Agata"}, {"contribution": 0.1, "aip": 1, "country": ["LT"], "rel": "aut", "org": [{"create": false, "contribution": 0.1, "name": "Lietuvos sveikatos mokslų universitetas", "id": "302536989"}], "lname": "Narbutaitė", "fname": "Rūta", "status": "0", "name": "Narbutaitė, Rūta"}, {"contribution": 0.1, "aip": 1, "country": ["LT"], "rel": "aut", "org": [{"create": false, "contribution": 0.1, "name": "Lietuvos Sveikatos mokslų universitetas", "id": "302536989"}], "lname": "Pranckevičienė", "fname": "Alma", "status": "0", "name": "Pranckevičienė, Alma"}, {"contribution": 0.1, "aip": 1, "country": ["LT"], "rel": "aut", "org": [{"create": false, "contribution": 0.1, "name": "Kauno technologijos universitetas", "id": "111950581"}], "id": "441539AB9279AE5A1AB14A3751436DE6", "lname": "Maskeliūnas", "fname": "Rytis", "status": "1", "name": "Maskeliūnas, Rytis"}, {"contribution": 0.1, "aip": 1, "country": ["LT"], "rel": "aut", "org": [{"create": true, "contribution": 0.1, "name": "Vytauto Didžiojo universitetas", "id": "111950396", "level": "0", "type": "uni", "research": "1", "status": "1", "unit": {"name": "Informatikos fakultetas", "id": "04", "level": "1", "type": "fak", "research": "1", "status": "1", "unit": {"name": "Taikomosios informatikos katedra", "id": "0401", "level": "2", "type": "kat", "research": "1", "status": "1"}}}], "id": "7B8631FFB9EBE514A8AA438A755E9DD0", "lname": "Damaševičius", "fname": "Robertas", "status": "1", "name": "Damaševičius, Robertas"}, {"contribution": 0.1, "aip": 1, "country": ["LT"], "rel": "aut", "org": [{"create": false, "contribution": 0.1, "name": "Kauno technologijos universitetas", "id": "111950581"}], "lname": "Narvydas", "fname": "Gintautas", "status": "0", "name": "Narvydas, Gintautas"}, {"contribution": 0.1, "aip": 1, "country": ["PL"], "rel": "aut", "lname": "Połap", "fname": "Dawid", "status": "0", "name": "Połap, Dawid"}, {"contribution": 0.1, "aip": 1, "country": ["PL"], "rel": "aut", "lname": "Mocny-Pachońska", "fname": "Katarzyna", "status": "0", "name": "Mocny-Pachońska, Katarzyna"}, {"contribution": 0.1, "aip": 1, "country": ["PL"], "rel": "aut", "lname": "Wozniak", "fname": "Marcin", "status": "0", "name": "Wozniak, Marcin"}, {"contribution": 0.1, "aip": 1, "country": ["PL"], "rel": "aut", "lname": "Tanasiewicz", "fname": "Marta", "status": "0", "name": "Tanasiewicz, Marta"}]}-
item.fulltextWith Fulltext-šosios teisės katedra-šosios teisės katedra-šosios teisės katedra- fakultetas- informatikos katedra-šosios teisės katedra-šosios teisės katedra-šosios teisės katedra-šosios teisės katedra-šosios teisės katedra-
Appears in Collections:1. Straipsniai / Articles
Universiteto mokslo publikacijos / University Research Publications
Files in This Item:
marc.xml8.56 kBXMLView/Open

MARC21 XML metadata

Show simple item record
Export via OAI-PMH Interface in XML Formats
Export to Other Non-XML Formats

CORE Recommender

Google ScholarTM



This item is licensed under a Creative Commons License Creative Commons