Please use this identifier to cite or link to this item:
Type of publication: research article
Type of publication (PDB): Straipsnis Clarivate Analytics Web of Science / Article in Clarivate Analytics Web of Science (S1)
Field of Science: Mechanikos inžinerija / Mechanical Engineering (T009)
Author(s): Steponavičius, Dainius;Pužauskas, Edvinas;Špokas, Liudvikas;Jotautienė, Eglė;Kemzūraitė, Aurelija;Petkevičius, Sigitas
Title: Concave Design for High-Moisture Corn Ear Threshing
Is part of: Mechanika / Kauno technologijos universitetas, Lietuvos mokslų akademija, Vilniaus Gedimino technikos universitetas. Kaunas : Technologija, 2018, vol. 24, no. 1
Extent: p. 80-91
Date: 2018
Note: eISSN: 2029-6983
Keywords: tangential threshing device;ear feed rate;grain separation;grain damage;power consumption
Abstract: In a threshing device, identifying the optimum balance between grain damage and grain loss during threshing is highly relevant while harvesting high-moisture corn ears. The qualitative performance indicators of a threshing device depend on the corn ear properties and process parameters as well as the device's design. Comparative experimental trials of two concaves (control and experimental) of a tangential threshing device were conducted under laboratory conditions by threshing high-moisture corn ears. The control concave's surface line corresponded to a circular arc, whereas that of the experimental concave corresponded to a portion of Archimedes' spiral. The clearance between the crossbars and cylinder rasp bars in the first section of the control concave length increased, whereas in the second section, it decreased. For the experimental concave, the clearance along the entire concave length consistently decreased. The experimental concave yielded approximately half the grain loss of the control during separation in the concave. A rational clearance between the experimental concave crossbars was validated because the portion of damaged grain did not exceed 3% at that point. With clearance l equal to 62.5 mm in the control concave, the grain threshing loss was 2.2%, whereas for the experimental concave, the loss was virtually independent of q and did not exceed the acceptable 0.3% limit. In general, the trials demonstrated that for high-moisture corn ear threshing, the surface line of the concave should correspond to a portion of Archimedes' spiral and the clearances between adjacent crossbars should be 62.5 mm
Affiliation(s): Vytauto Didžiojo universitetas
Žemės ūkio akademija
Appears in Collections:1. Straipsniai / Articles
Universiteto mokslo publikacijos / University Research Publications

Files in This Item:
marc.xml9.99 kBXMLView/Open

MARC21 XML metadata

Show full item record
Export via OAI-PMH Interface in XML Formats
Export to Other Non-XML Formats

CORE Recommender

Citations 1

checked on Jun 6, 2021

Page view(s)

checked on Jun 6, 2021


checked on Jun 6, 2021

Google ScholarTM



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.