Please use this identifier to cite or link to this item:https://hdl.handle.net/20.500.12259/90774
Type of publication: Straipsnis Clarivate Analytics Web of Science ar/ir Scopus / Article in Clarivate Analytics Web of Science or / and Scopus (S1)
Field of Science: Transporto inžinerija / Transport engineering (T003)
Author(s): Labeckas, Gvidonas;Slavinskas, Stasys;Kanapkienė, Irena
Title: The individual effects of cetane number, oxygen content or fuel properties on the ignition delay, combustion characteristics, and cyclic variation of a turbocharged CRDI diesel engine – Part 1
Is part of: Energy Conversion and Management. Oxford : Pergamon-Elsevier Science Ltd, Vol. 148 (2017)
Extent: p. 1003-1027
Date: 2017
Keywords: Diesel engine;Diesel and HRD fuels;Ethanol;Biodiesel;Ignition;Combustion;Heat release;Cyclic variation
Abstract: The study deals with the effects made by individual variation of cetane number, fuel-oxygen content, or widely differing properties of diesel-HRD fuel blends involving ethanol (E) or biodiesel (B) on the ignition delay, combustion phenomenon, maximum heat release rate, and the cyclic variation of a turbocharged CRDI diesel engine. The most important control factors one after another operated separately in this study to make a difference. Load characteristics were taken when running with a straight diesel and various (18) diesel-HRD fuel blends at maximum torque mode of 2000 rpm and speeds of 1500 and 2500 rpm to provide correct interpretation of the test results. Then, load (bmep) characteristics were plotted as a function of the relative air-fuel ratio (k) and the analysis of combustion parameters was conducted for the ‘lambda’ values of k = 1.30, 1.25 and 1.20, at the respective speeds of 1500, 2000 and 2500 rpm. Analysis of changes in the ignition delay, combustion characteristics, and the cyclic variation of parameters when using fuel blends of both origins was performed on comparative bases with the corresponding values measured with ‘base-line’ blends with CN = 51.2 or zero oxygen content and a straight diesel to reveal the potential developing trends. The enhanced cetane number of oxygenated fuels improved combustion and reduced cyclic variation when running at the high speed of 2500 rpm mainly. Whereas fuel-oxygen content should be neither too high nor too low, but just enough to assure complete combustion and low cyclic variation. The differing properties of the fuel involving ethanol or biodiesel were a separate factor strongly affecting diffusive combustion and the coefficient of cyclic variation (COV). Developing trends in the combustion characteristics were used to interpret the resulting changes in engine performance, emissions, and smoke (Part 2)
Internet: http://www.sciencedirect.com/science/article/pii/S0196890417305964
Affiliation(s): Vytauto Didžiojo universitetas
Žemės ūkio akademija
Appears in Collections:Universiteto mokslo publikacijos / University Research Publications

Files in This Item:
marc.xml9.26 kBXMLView/Open

MARC21 XML metadata

Show full item record
Export via OAI-PMH Interface in XML Formats
Export to Other Non-XML Formats


CORE Recommender

WEB OF SCIENCETM
Citations 1

26
checked on Feb 27, 2021

Page view(s)

14
checked on Aug 17, 2019

Google ScholarTM

Check

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.