Rankinių mašinų darbinių dalių dėvėjimosi įtaka rankas veikiančiai vibracijai
Date |
---|
2017 |
Darbuotojų rankas ar visą kūną veikianti vibracija yra vienas pagrindinių neigiamai darbuotojus veikiančių rizikos veiksnių, dėl kurių dažnai diagnozuojamas jungiamojo audinio ir skeleto raumenų profesinės ligos. Šiame straipsnyje analizuojama rankinių mašinų keliamos rankas veikiančios vibracijos priklausomybė nuo komplektuojančių darbinių dalių būklės. Tyrimai atlikti tiriant kampinių šlifuoklių, grandininių pjūklų ir žoliapjovių vibracijos vertes. Nustatyta, kad iš visų tirtų rankinių mašinų visais atvejais yra viršijama 2,5 m/s2 kasdienio veikimo vertė ir net 65 % tirtų atvejų viršijama 5 m/s2 poveikio vertė. Taip pat nustatyta, jog matuojant vibracijos vertes esant darbinėms dalims naujoms ir joms nusidėvėjus galimas net iki 35 % vibracijos pagreičio vertės skirtumas. Dėvintis rankinių mašinų darbinėms dalims, kampinių šlifuoklių vibracija - mažėja, o grandininių pjūklų ir žoliajovių vibracija didėja.
Hand-arm and whole body vibrations are one of the main risk factors on employees which often causes musculoskeletal occupational diseases. This article analyzes the effect of working par wear of the hand-held tools on vibration acceleration values. Investigations were carried out with angle grinders, chain saws and lawn mowers. It was found that all tested hand-held machines in all cases exceeded 2.5 m/s2 daily exposure action value, and 65 percent of the cases exceeded the limit value of 5 m/s2. It was also found that the result of vibration might be by 35 percent higher when hand-held tool is equipped with new and worn working parts (e.g. cutting disc). It was found that vibration level of angle grinders decreases when the diameter of the cutting disc reduces, while for the trimmers increases. These results might be useful for the more precise risk assessment of hand arm vibration as suggests to pay more attention to the condition of working parts of the tools but not only to the duration of the exposure.