Please use this identifier to cite or link to this item:https://hdl.handle.net/20.500.12259/111816
Type of publication: Straipsnis Clarivate Analytics Web of Science ar/ir Scopus / Article in Clarivate Analytics Web of Science or / and Scopus (S1)
Field of Science: Mechanikos inžinerija / Mechanical Engineering (T009)
Author(s): Čeponis, Andrius;Mažeika, Dalius;Vasiljev, Piotr
Title: Flat cross-shaped piezoelectric rotary motor
Is part of: Applied sciences. Basel : MDPI AG, 2020, vol. 10, iss. 14
Extent: p. 1-14
Date: 2020
Note: Article no. 5022
Keywords: Piezoelectric motor;Flat cross-shaped stator;Bending vibrations
Abstract: A numerical and experimental investigation of a flat, cross-shaped piezoelectric rotary motor is presented. The design and configuration of the motor allow it to be mounted directly to the printed circuit board or integrated into the other system where mounting space is limited. The design of the motor is based on the cross-shaped stator with 16 piezo ceramic plates, which are glued on it. The rotor is placed at the center of the stator and consists of two hemispheres, a shaft, and a preloading spring. Special clamping of the stator was developed as well. It consists of four V-shaped beam structures that allow it to rigidly clamp the stator with reduced damping effect to vibrations. The operation principle of the motor is based on the first in-plane bending mode of the cross-shaped stator. The motor excitation is performed through four harmonic signals, which have a phase difference of π/2. A numerical investigation of the motor was conducted to optimize the geometrical parameters of the stator and to analyze the displacement characteristics of the contacting point. The prototype of the motor was made, and the electrical, as well as rotation speed characteristics of the motor, were measured. The results of the experimental investigation showed that the motor is able to provide a maximum rotation speed of 972.62 RPM at 200 Vp-p when the preload force of 22.65 mN was applied
Internet: https://www.vdu.lt/cris/bitstream/20.500.12259/111816/2/ISSN2076-3417_2020_V_10_14.PG_1-14.pdf
https://hdl.handle.net/20.500.12259/111816
https://doi.org/10.3390/app10145022
Affiliation(s): Edukologijos tyrimų institutas
Vilniaus Gedimino technikos universitetas
Vytauto Didžiojo universitetas
Appears in Collections:1. Straipsniai / Articles
Universiteto mokslo publikacijos / University Research Publications

Files in This Item:
marc.xml6.98 kBXMLView/Open

MARC21 XML metadata

Show full item record
Export via OAI-PMH Interface in XML Formats
Export to Other Non-XML Formats


CORE Recommender

Google ScholarTM

Check

Altmetric


This item is licensed under a Creative Commons License Creative Commons