Individualaus namo pamatų drenažas
Einoris, Artūras |
Tyrimo objektas: individualaus gyvenamojo namo pamatų drenažas. Tyrimo tikslas: individualaus gyvenamojo namo pamatų drenažo projektas. Tyrimo metodai: atlikta literatūros apžvalga, surinkta metodinė medžiaga. Įvertinta individualaus gyvenamojo namo pamatai ir esančios drėgmės priežastys bei techninė būklė, atlikti skaičiavimai: apskaičiuotas debitas, drenažo atstumas nuo pamatų, parinkti vamzdžių diametrai ir nuolydžiai, numatyti filtrai ir kontrolinių šulinių vietos, parinktas drenažinis siurblys. Statybinio drenažo išilginiai profiliai išbraižyti AutoCAD programa. Tyrimo rezultatai: ištyrinėjus rūsio drėgmės priežastis, nustatyta, kad sniego tirpsmo metu ir po ilgalaikių liūčių kaupiasi podirvio vanduo, kurio maksimalus lygis būna arti žemės paviršiaus, ir todėl yra semiamas rūsys. Šiai problemai pašalinti, suprojektuota 75 m žiedinio drenažo sistema su žvyro ir geotekstilės filtru. Priimama, kad drenažas klojamas 0,5 m giliau pamatų Numatoma naudoti Ø 113 mm plastikinius vamzdžius, minimalus nuolydis 4 ‰. Apskaičiuotas minimalus vamzdynų atstumas nuo pastato sienos yra 1 m., vamzdynus įrengti naudojant žvyro ir filtruojančio audinio (geotekstilės) filtrą. Žvyro granulės 8-11 mm., užpilo sluoksnio storis 5 cm po ir 10 cm virš drenavimo vamzdžio. Suprojektuoti 5 vnt Ø 0,6 m požeminiai ir 1 vnt antžeminis Ø 1,0 m (Nr. 6, su sėsdintuvu) kontroliniai šuliniai sistemos priežiūrai. Šulinyje Nr. 6 numatoma panardinti drenažinį siurblį, kuris drenažinį vandenį perpumpuos į lietaus nuotekų sistemą. Renkantis siurblį, įvertinamas siurblio sukeliamas slėgis bei reikalingas našumas ir parenkamas drenažinis siurblys XKS-250P.
Research object: foundation drainage of an individual residential house Research aim: the project of foundation drainage system of individual residential house. Objectives: 1. calculate the flow rate; 2. calculate the minimum drainage distance from the foundation; 3. Select pipeline diameters, slopes, filter materials; 4. Design control wells and select a drainage pump. Research methods: A review of scientific literature, methodological material was collected. The foundations of the individual residential house and the causes and technical condition of the existing humidity were evaluated, calculations were performed: flow rate, drainage distance from the foundations were calculated, pipe diameters and slopes were selected, filters and control well locations were provided, and a drainage pump was selected. Longitudinal profiles of construction drainage were drawn in AutoCAD program. Research results: after studying the causes of basement moisture, it was found that during snowmelt and after prolonged rains, subsoil water accumulates, the maximum level of which is close to the ground surface, and therefore the basement is dumped. To eliminate this problem, a 75 m ring drainage system with a gravel and geotextile filter was designed. It is assumed that the drainage is laid 0.5 m deeper than the foundation. It is planned to use Ø113 mm plastic pipes, minimum slope 4 ‰. The calculated minimum distance of the pipelines from the wall of the building is 1 m, the pipelines are installed using a gravel and filter cloth (geotextile) filter. Gravel granules 8-11 mm, the thickness of the climbed layer 5 cm below and 10 cm above the drainage pipe. 5 pcs Ø 0.6 m and 1 pc Ø 1.0 m (No. 6, with seat) control wells for system maintenance have been designed. In well no. 6 it is planned to submerge the drainage pump. When choosing a pump, the pressure caused by the pump and the required capacity are evaluated and the drainage pump XKS-250P is selected.